User's Manual

Status LED
Operating system manage Status LED in this way:
- blinking red LED: external battery charge < 20 % and internal battery charge > 50 %
- steady red LED: external battery charge < 20 % and internal battery charge < 50 %
- blinking violet LED: VisionAR smart glasses is not recognized by Control Unit
It is recommended to fix the LED light (e.g. blue color) when application is running. LED light color
management is assigned to software application
Note: if the Battery Pack is disconnected from the Contol Unit, the Status LED is steady red
Bluetooth, Wi-Fi and GSM LEDs
The LEDs are programmable and can be turn on through a custom application when modules are
active
CU Buttons
Univet Control Unit has different buttons as you can see in Figure 2:
Figure 2: Top and Lateral view of Univet Control Unit
1. Power button
2. ESC
3. Up
4. Enter/Confirm
5. Down