User's Manual

4. Control Unit Overview
Specs
 Processor (model, number of cores, frequency (rate)); Quad-core: NXP IMX6Q @800 MHz
 RAM (capacity): 1 GB
 Built-in memory (capacity): 4 GB
 Use of memory cards: up to 16 GB
 GSM, GPS radio-module
 Wi-Fi std 802.11 b/g/n
 Bluetooth standard 4.2 and BLE connection
 Battery (type, battery capacity, run time on a single charge, recharging time):
Main battery, 4000 mAh, runtime about 4hrs, recharging time about 4hrs.
Additional back- up battery: 500 mAh for hot swap.
 Controller availability: four virtual buttons via capacitive touch-pad on the glasses, four
physical buttons on the Control Unit.
 Sound (speakers, microphone); only by Bluetooth device
Figure 1: Frontal view of Univet Control Unit
1. Programmable LEDs (see LED lights)
2. USB type C port (see Ports)
3. USB type micro B port (see Ports)
Ports
Two ports are present on the top side of the CU (as indicated in Figure 1):
- USB Type C port which is used to connect the glasses to the CU
- USB Type Micro B port to access to CU in Debug Mode
LED Lights
The CU has four LED lights (as indicated in Figure 1):
o Status LED
o Bluetooth, Wi-Fi and GSM LEDs
During Control Unit update operations, LED lights behaviour is typical and described in Control Unit
Update.