Terms and Conditions
VisionAR – VisionAR Terms and Conditions
Risks– 9
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4 Risks
Using augmented reality may distract you and cause dangerous situations (for example, this device must not be
used while driving or riding a bicycle). By using this device you agree that you are responsible for observing the laws
in place that prohibit or restrict the use of such devices.
In particular you should consider the following areas of risk:
Electromagnetic Interference(see page 9)
Magnetic Connector(see page 9)
Radio Modules(see page 9)
Personal Safety(see page 10)
Health(see page 10)
4.1 Electromagnetic Interference
When using this device in areas where the use of electromagnetic waves is prohibited, such as in an airplane
or hospital, disable the PPE or the Bluetooth / Wi-Fi function. Do not use these functions near automatically
controlled devices, such as automatic doors or fire alarms
Switch off the device in case of danger or emergency, as electromagnetic waves can cause interference and
malfunctions in electronic equipment
Do not use this device in places where it may put your or others at risk, for example in health facilities and
near electronic medical equipment
Note the following points when using the Bluetooth or Wi-Fi function in medical facilities
Do not take this product into operating rooms, intensive care units (ICUs) or cardiac therapy units
(CCUs)
Even when not in the wards, turn off this product or stop the electromagnetic waves if you are using
electronic medical equipment
Follow the rules set by medical institutions that prohibit the use of devices which emit
electromagnetic waves or prohibit access to certain areas with such devices
4.2 Magnetic Connector
Neodymiummagnets were used to connect the two parts of the CU- PPE cable.The magnets must be kept at least at
thespecified safety distances :
The minimum distance to a pacemaker is 62mm for a magnet with a pull of 6.2kg
The minimum distance to a hearing aid/s is 20mm for a magnet with a pull of 6.2kg
4.3 Radio Modules
The radio modules in the Control Unit can cause interference or temporary malfunctions in the acoustic
instruments.
The user must be warned about radio modules situation by the application which will be running on the control
unit. Such application will be made and installed by customer (that could be the application SW developer).
The same application must notify the user about performed action. An example of notification could be as
Please note that Univet Control Unit without an application has no use and does not run any radio
component.