Technical data

Operation
4-40
P/N 7135049A
E 2007 Nordson Corporation
VBC_Siemens
Motor
Switching On/Off Motor (Individual Enable)
Only enabled motors can be switched on. Prerequisite: The system is ready
for operation (green status display System ready and green indication lamp
on optional light tower lit).
rpm: revolutions per minute
Fig. 4-50 M1: Mode Speed
control with
pressure display
Enabling
If there is no collective enable, the individual motors are enabled with the
key Switch motor on/off (individual enable) and via the interface Standard
I/O with the signal Enable motor.
Switching On
If there is a collective enable, the individual motors are switched on with the
key Switch motor on/off (individual enable) and via the interface Standard
I/O with the signal Enable motor.
The indication lamp in the key can be different colors:
Gray (off): No motor enable on the control panel
Green: The motor is enabled on the control panel