Technical data

Operation
4-34
P/N 7135049A
E 2007 Nordson Corporation
VBC_Siemens
Melter (contd.)
Setup (Screen 1: Seven-day Clock, Standby, Level)
NOTE: To be able to work on the parameter level, the password for level 2
(trained personnel) must first be entered.
Fig. 4-36 V7
Seven-day Clock
Heaters can be switched on via the seven-day clock. For that purpose,
enter a starting time for every day of the week.
If 0:00 is entered as the starting time, the seven-day clock is deactivated for
that day.
NOTE: The switching times are entered in 24-hour format.
Fig. 4-37 V8
Set Date / Time
The current date and time are set before the melter is delivered. However,
both can be changed in the control panel setup.
Refer to the manual Touch Panel TP 270 for more information.
NOTE: The time is not automatically changed to and from daylight savings
time.
Fig. 4-38
Customer Setup
Text can be entered that will appear on the starting screen, e.g. adhesive
type used in the production line.
Fig. 4-39 V12