Technical data

A B C D
E F G H
: Activated : Deactivated
Activated / Deactivated
ABC
DEF
GH
Selected feature
Activated / Standby
ABC
DEF
GH
Selected feature
Operation
4-33
P/N 7135049A
E 2007 Nordson Corporation
VBC_Siemens
Working with Application Groups
NOTE: To be able to work on the parameter level, the password for level 2
(trained personnel) must first be entered.
If no application groups have been established yet, proceed in this order:
1. Select standard I/O group inputs if groups are to be switched via the
interface.
2. Select feature (Deactivated or Standby)
3. Switch application group(s).
Fig. 4-32 V1
Switch Application Group(s)
Temperature channels (except for grid and reservoir) can be combined to
application groups A to H (Refer to Defining Groups).
The indication lamp shows whether the application group is activated
(green) or whether the application group is deactivated or in standby (gray).
Touch key to switch between activated and deactivated/standby.
Fig. 4-33 V5
The feature Deactivated or Standby can be selected in the setup screen.
The selection is valid for all application groups.
Fig. 4-34 Deactivated
Fig. 4-35 Standby