Technical data

Operation

4-30

P/N 7135049A

E 2007 Nordson Corporation

VBC_Siemens

Melter

Entering/Exiting Standby

Refer to Overview / V9 for information on standby setup.

Fig. 4-27 V1

Switching On/Off All Motors (Collective Enable)

Also refer to Motor Startup Protection.

Only enabled motors can be switched on. Prerequisite: The system is ready

for operation (green status display System ready and green indication lamp

on optional light tower lit).

Enabling

If there is no individual enable, the motors are enabled with the key Switch

all motors on/off (collective enable) and via the interface Standard I/O.

Switching on

If there are individual enables, the motors are switched on with the key

Switch all motors on/off (collective enable) and via the interface Standard

I/O.

The indication lamp in the key can be different colors (Also refer to M2

Motor enable):

Gray (off): No collective enable on control panel

Green: Collective enable on control panel

Motor 1

Motor 2

Fig. 4-28 Motor(s): Enable on the motor screen − switch on on the melter screen