Technical data

Index Protocols and Communication Data List
B-34
P/N 7135049A
E 2007 Nordson Corporation
VBC_Siemens
Data
index
Data designation Channel
number
Setting range,
resolution
Temperature
146 Value for overtemperature warning
The value for the overtemperature warning can not be
greater than the value for the overtemperature fault.
Standard: Absolute temperature  235 °C (455 °F)
HT: Absolute temperature  255 °C (490 °F)
1 − 54
5 °C − 30 °C
(10 °F − 55 °F)
5 °C
147-
150
Reserved
151 Value for overtemperature fault
Standard: Absolute temperature  245 °C (475 °F)
HT: Absolute temperature  265 °C (510 °F)
1 − 54
5 °C − 60 °C
(10 °F − 110 °F)
10 °C
152-
155
Reserved
156
[R]
Value for overtemperature shutdown 1 − 54 Refer to value for
overtemperature fault +10 °C
(20 °F)
157 Temperature status and alarms 1 − 54 Bit field −
[R]
Bit 0 Value: 1 Heater switched on
0 Heater switched off
Bit 1 Value: 1 Alarm: Undertemperature warning
0 No alarm
Bit 2 Value: 1 Alarm: Undertemperature fault
0 No alarm
Bit 3 Value: 1 Alarm: Overtemperature warning
0 No alarm
Bit 4 Value: 1 Alarm: Overtemperature fault
0 No alarm
Bit 5 Value: 1 Alarm: Overtemperature shutdown
0 No alarm
Bit 6 Value: 1 Alarm: Sensor short-circuit (fault)
0 No alarm
Bit 7 Value: 1 Alarm: Sensor input open or sensor
broken (fault)
0 No alarm
158 Regulation ratio
The regulation ratio indicates the percentage of a time
interval during which the heater output is on.
Duration of measurement is 1000 ms
Example: 82 % = 820 ms on and 180 ms off
1 − 54 0 − 100 % −
159-
169
Reserved