Technical data

Index Protocols and Communication Data List
B-21
P/N 7135049A
E 2007 Nordson Corporation
VBC_Siemens
Communication Data List
General Information
S ACM = Auxiliary Control Module (Option). Additional electrical cabinet that control pump stations, for
example.
S Transmission data with decimal places must be multiplied by the factor 10. Received data with decimal
places must be divided by the factor 10.
Because of the two decimal places, the following applies to data index {65}: 100 or B100.
S
1)
[R]: All data with R(ead) can only be read by the master. Writing is not permitted.
Data
index
1)
Data designation Channel
number
Setting range,
resolution
Melter
1
[R]
Manufacturer 0 ”Nordson” −
2
[R]
Software version IPC and HMI 0 ”1.000” − ”9.999” −
3
[R]
Recipe version 0 ”00.00” − ”99.99” −
4 Melter control mode 0 0 − 2 0
[R] 0: Standard
1: Field bus
2: Dual
5
[R]
Counter: Total hours with heaters on 0 0 − 32767 h −
6 Service interval
Definable time for signaling a certain service task
0 1 − 8736 h (1 year) 500
7 Reset service symbol 0 0 / 1 0
0: No reset
1: Reset
Time for service interval is reset to ”0”
8 Reserved
9 System ready delay time 0 0 − 60 min 0