Technical data

Operation
4-49
P/N 7135049A
E 2007 Nordson Corporation
VBC_Siemens
Pressure Control − Manual Mode
In manual mode the operator has control over the motors. The pressure is
equal to the setpoint and does not change.
Only pressure sensor A: 5 bar (73 psi)
Fig. 4-63 M5
Pressure Control − Key-to-line
Min. pressure: Setpoint pressure when the external line speed signal is
0%.
0 bar (0 psi)
Max. pressure: Pressure setpoint when the external line speed signal
exceeds the entered value Line speed for max. pump speed.
70 bar (1015 psi)
PID control
parameters
PID Pressure Control Parameters
NOTE: Should be adjusted only by personnel with experience in metrology
and control technology.
Fig. 4-64 M7