Technical data

Operation
4-45
P/N 7135049A
E 2007 Nordson Corporation
VBC_Siemens
Parameters (Screen 4: Pressure Alarms, Switching
Between Speed / Pressure Control, Pressure Setpoints)
NOTE: To be able to work on the parameter level, the password for level 2
(trained personnel) must first be entered.
Fig. 4-55 M5
Pressure Alarm Monitoring (Global)
Global = for all motors
Pressure alarm monitoring is available only with options Pressure display
and Pressure control.
If pressure alarm monitoring is switched on, underpressure and
overpressure are monitored. Alarms are triggered depending on the set
warning and fault values (Refer to Pressure Sensor A).
NOTE: When the speed is regulated in key-to-line mode, an underpressure
warning may be displayed during parent machine startup until the melter
speed setpoint is reached.