Technical data

Operation
4-44
P/N 7135049A
E 2007 Nordson Corporation
VBC_Siemens
Motor (contd.)
Parameters (Screen 3: Threshold Switch)
NOTE: To be able to work on the parameter level, the password for level 2
(trained personnel) must first be entered.
Fig. 4-54 M4
Threshold Switch
NOTE: The threshold switch is automatically deactivated as long as
pressure build-up is enabled.
In threshold switch mode the motors are started and stopped by the line
speed signal.
Motor
100 %Start at:Stop at:0
Off
On
(lower threshold
value)
(upper threshold
value)
Line speed
signal value
When the upper threshold value is exceeded, the motor starts; when the
value falls below the lower value, the motor stops.
Start at: 10.0 %
Stop at: 5.0 %