Installation manual

2/37
Schneider Electric
2
2.2
Modicon TSX Micro
automation platform 0
Telefast
®
2 pre-wired system
Plug-in relay sub-bases
Sub-bases for plug-in solid state input relays
(1)
No. of Term- For Isolation Input Type Reference Weight
chan- inals/ relay PLC/ connection of
nels
channel type application connection kg
16 2 ABS-7E Yes Volt-free Screw
ABE-7P16F310 0.850
ABR-7
ABS-7S33E
Spring
ABE-7P16F310E 0.850
Polarity distribution Screw
ABE-7P16F312 0.850
Output sub-bases, equipped with plug-in electromechanical relays
(2)
No. of Relay Type No. and Polarity Reference Weight
chan- width of type of distribution/
nels mm relay contacts application kg
16 5 ABR-7S11 1 N/O Contact common
ABE-7R16T111 0.600
per group of 4 channels
Contact common
ABE-7R16M111 (3) 0.600
per group of 4 output channels
+ 2 input common terminals
10 ABR-7S21 1 N/O Volt-free
ABE-7R16T210 0.735
Common
ABE-7R16T212 0.730
on both poles (4)
ABR-7S23 1 C/O Contact common (4)
ABE-7R16T231 0.730
Volt-free
ABE-7R16T230 0.775
12 ABR-7S33 1 C/O Volt-free
ABE-7R16T330 1.300
Common
ABE-7R16T332 1.200
on both poles (5)
ABR-7S37 2 C/O Volt-free
ABE-7R16T370 1.300
(1) Not equipped with relays.
(2) Both technologies (electromechanical and solid state) may be combined on the same sub-base.
(3) 2 connection methods are available, enabling inputs and outputs to be connected to the same sub-base at the same
time.
(4) Per group of 8 channels.
(5) Per group of 4 channels.
ABE-7R16M111
816471
ABE-7R16T210
81646
9
References
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter