Installation manual

2/32
Schneider Electric
2
2.2
0/15
8/150/7
U1
1
3
2
2
2
2
4
5
4
Modicon TSX Micro
automation platform 0
Telefast
®
2 pre-wired system
Connection cables for Micro PLCs
1 I/O modules equipped with HE 10 connectors. Available in modules of 8, 12, 28 and 64 I/O.
2 A single type of cable equipped with 20-way HE 10 connectors irrespective of the 8, 12 or 16-channel modularity.
The HE 10 connectors may be moulded (TSX CDPppp) or self-perforating (ABF-H20Hppp).
These cables are available in 0.5, 1, 2, 3 and 5 metre lengths. They use AWG 28 (0.08 mm
2
) for connection of inputs
and relay sub-bases, and AWG 22 (0.324 mm
2
) for direct connection of the 8 and 28 I/O module 0.5 A outputs.
3 16 channels may be split into 2 x 8 channels using splitter sub-base ABE-7ACC02.
4-5 8-channel and 16-channel sub-bases respectively.
(1) The c 24 V power supply is connected using Telefast 2 sub-bases only. The c 0 V connections must be equipotential.
Presentation
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter