Installation manual

2/9
2
2.1
Characteristics
Modicon TSX Micro
automation platform 0
Discrete I/O modules
(1) Characteristics at 60 °C for 60 % I/O loading or at 30 °C for 100 % I/O loading.
(2) Adaptation and analogue adjustment module enables the transformation of 8 integral
analogue inputs for TSX 37 22 bases into 8 discrete inputs (see page 3/4).
Characteristics of c 24 V input modules (1)
Type of modules TSX DEZ 12D2/TSX DMZ 28DR TSX DEZ 12D2K/TSX DEZ 32D2 TSX DMZ 16DTK
Number of inputs
12/16 12/32 8
Connection
Screw terminal block HE 10 connector/screw terminal
block
HE 10 connector/
enclosed terminal
block
Nominal input
values
Voltage
V c 24 (positive
logic)
c 24 (negative
logic )
c 24 (positive logic)
Current
mA 9 6 7
Sensor supply (ripple included)
19…30 (possible up to 34 V, limited to 1 hour per 24 hours)
Input limit values At state1 Voltage
V u 11 y 8 u 11
Current
mA > 2.5 > 6 > 2.5
At state 0 Voltage
V < 5 > Ual - 5 < 5
Current
mA < 1,5 < 2 < 1.5
Input impedance at state 1
KΩ 2.4 4 3,4
Configurable
response time
State 0 to 1
ms 0.1…7.5
State 1 to 0
ms 0.1…7.5
IEC 1131-2 conformity
Yes, type 1 – Yes, type 2 Yes, type 1
Proximity sensor compatibility 2/3-wire
Yes
Isolation resistance
MΩ > 10 at c 500 V
Type of input
Resistive Current sink Resistive
Consumption
See page 6/4
Dissipated power
W TSX DEZ 12D2: 2,7
TSX DMZ 28DR: 4.5
TSX DEZ 12D2K: 2,7
TSX DEZ 32D2: 6
3
Isolation Between channels and ground
V rms 1500 - 50/60 Hz for 1 minute
Between channels and internal logic
V rms 1500 - 50/60 Hz for1 minute
Type of modules TSX DMZ 28DTK/DMZ 28DT TSX DMZ 64DTK TSX ACZ 03 (3)
Number of inputs
16 32 8
Connection
HE 10 connector/screw terminal
block
HE 10 connector SUB- D connector
Nominal input
values
Voltage
V c 24 (positive logic)
Current
mA 7 3.5 8
Sensor supply (ripple included)
19…30 (possible up to 34 V, limited to 1 hour per 24 hours)
Input limit values At state1 Voltage
V u 11
Current
mA > 2.5
At state 0 Voltage
V < 5 < 5 < 5
Current
mA < 1.5 < 1.4 < 1.4
Input impedance at state 1
KΩ 3.4 6.3 2.67
Configurable
response time
State 0 to 1
ms 0.1…7.5 1/1.5 (fixe)
State 1 to 0
ms 0.1…7.5 0.2/0.3 (fixe)
EC 1131-2 conformity
Yes, type 1
Proximity sensor compatibility 2/3-wire
Yes
Isolation resistance
MΩ > 10 at c 500 V
Type of input
Resistive Current sink Resistive
Consumption
See page 6/4
Dissipated power
W 5 –
Isolation Between channels and ground
V rms 1500 - 50/60 Hz for 1 minute –
Between channels and internal logic
V rms 1500 - 50/60 Hz for 1 minute –
R
eferences:
p
ages 2/13 and 2/14
Connections :
Connections:
pages 2/15 to 2/17
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter