Installation manual

2/7
2
2.1
Connection principles
(continued),
description
Modicon TSX Micro
automation platform 0
Discrete I/O modules
The TSX DMZ 16 DTK
1 module is also designed for association with Tego Dial and
Tego Power (1) systems set up.
In the example the connection is achieved by simply connecting cable TSX CDP pp3
2 to the APE-1B24M Dialbase sub-base 3 installed on the Dialpack console 4 , which
is fitted with a mounting plate
5 for MMI components.
Half-format or standard format I/O modules with connection via screw terminal block
comprise:
1 At rigid metal casing.
2 At locking mechanism for fixing the module in its slot. This can only be accessed
when the terminal block is removed.
3 At removable screw terminal block for connection to sensors and preactuators.
4 At cover for the terminal block screws, which also serves as a label holder.
I/O modules with connection via connector comprise:
1 At rigid metal casing.
2 At locking mechanism for fixing the module in its slot.
3 One, two or four HE 10 connectors for connection to sensors and preactuators.
The TSX DMZ 16DTK module comprises:
1 At rigid metal casing.
2 At locking mechanism for fixing the module in its slot.
3 One HE 10 connector for connection to sensors and preactuators.
4 At cage terminal for connecting the input and output power supplies.
(1) See pages 2/44 to 2/3.
Connection principles (continued)
Connection to Tego Dial and Tego Power systems
1
2
3 45
Description
Discrete I/O modules connected via screw terminal block
1
2
3
4
Half-format or standard format I/O module
Discrete I/O modules connected via connector
1
2
3
1
2
3
Half-format I/O module
Standard format I/O module
Discrete I/O module connected via connector and cage terminal
C
haracteristics:
p
ages 2/9 to 2/12
References :
References:
pages 2/13 and 2/14
Connections:
pages 2/15 to 2/17
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter