Installation manual

2/5
2
2.1
0
open or closed tags (minimum cross-section 0.28 mm
2
), I/O connection on HE 10 connector: with preformed cables with flying leads (cross-section
0.324 mm
2)
ribbon cables (cross-section 0.08 mm
2
) or connection cables (cross-section
0.324 mm
2
).
4 outputs 8 outputs 12 inputs 8 inputs/8 outputs
Outputs c 24 V/2 A Outputs c 24 V/0.5 A Inputs c 24 V Inputs c 24 V
Outputs c 24 V/0.5 A
Connection via 20-way HE 10 connector
8, 12 or 16 channels, with or without DEL, with common or
2 terminals per channel
Inputs: 16 channels c 5V TTL, c 24 V, c 48 V, a 48 V,
a 115 V or 230 V, 2 terminals per channel
Outputs: 8 or 16 channels with 1 N/O pr C/O pr spmod state
remaus, c 5…48 V, c 24 V, a 24…240 V 1 or 2 terminals
per channel
Yes (see page 2/44)
Yes (see page 2/46)
Sensor voltage monitoring
Type 2 Type 1
Positive
c/a 2-wire, c 2-wire
c 3-wire PNP
c 2-wire,
c 3-wire PNP
Preactuator voltage monitoring
Configurable fallback of outputs
Preactuator voltage
monitoring. Configurable
fallback of outputs
Yes Yes
Protected Protected
Positive Positive
TSX DSZ 04T22 TSX DSZ 08T2 TSX DSZ 08T2K TSX DEZ 12D2K TSX DMZ 16DTK
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter