Installation manual

2/3
2
2.1
0
open or closed tags (minimum cross-section 0.2mm
2
, maximum 1.5 mm
2
) I/O connection on HE 10 type connector: with preformed
cables with flying leads (cross-section 0.324 mm
2
), ribbon
cables (cross-section 0.08 mm
2
) or conection cables (cross-
section 0.324 mm
2
).
16 inputs/12 outputs 32 inputs/32 outputs
Inputs c 24 V
Relay outputs 3 A (lth)
Inputs a 100…120 V
Relay outputs 3 A (lth)
Inputs c 24 V
Outputs c 24 V/0.5 A
Inputs c 24 V
Outputs c 24 V/0.1 A
Connection via 20-way HE 10 connector
8, 12 or 16 channels, with or without LED, with common or
terminals per channel
Inputs: 16 channels c 5V TTL, c 24 V, c 48 V, a 48 V,
a 115 V or 230 V, 2 terminals per channel
Outputs: 8 or 16 channels, with 1 N/O, 1 or 2 C/O or solid state
relays, c 5…48 V, c 24 V, a 24…240 V 1 or 2 terminals
per channel
Yes (see page 2/44)
Yes (see page 2/46)
Sensor voltage monitoring
Type 1 Type 2 Type 1
Positive/Negative – Positive
c 2-wire,
c 3-wire PNP/NPN
c/a 2-wire, a 2-wire c 2-wire,
c 3-wire PNP
Preactuator voltage monitoring
Configurable fallback of outputs
Yes
Protected
Positive
TSX DMZ 28DR TSX DMZ 28AR TSX DMZ 28DT TSX DMZ 28DTK TSX DMZ 64DTK
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter