Installation manual

6/5
6
Modicon TSX Micro
automation platform
0
Power consumption of TSX Micro PLC modules
Reference Format Number Nominal currents consumed in mA (1)
1/2 : half Voltage c 5 V Voltage c 24 VR Voltage c 24 V (2)
S : standard Module Total Module Total Module Total
Report
Communication
TSX CPP 110 –60
TSX ETZ 410/510 (4)
TSX STZ 10 1/2 130
TSX SAZ 10 (3) 1/2 100
TSX SCP 111 – 140
TSX SCP 112 – 120
TSX SCP 114 – 150
TSX FPP 10/20 – 330
TSX MBP 100 – 220
TSX P ACC 01 – 150
Terminals
FTX ADJ 117 02 – 310
XBT H811050 – 150
Consumption by
voltage
Total current (mA)
a power supplies Nominal current – 2800 500 400
Peak current 3200 600 600
c power supplies Nominal current –
2800 – –
Peak current 3200 – –
(1) The first value corresponds to the module consumption with 60% of inputs and/or outputs at state 1 simultaneously. The second value is for 100% of inputs and/
or outputs at state 1.
(2)
c 24 V sensor voltage, provided by the a 100…240 V power supply on basic configurations, is limited to supplying approx. 100 inputs. In excess of this, use
a process power supply (see page 2/61).
(3) (Consumption on
c 30 V of the power supply for the AS-i bus : 50 mA typical (100 mA max).
(4) External module to be supplied with
c 24 V: 100 mA typical (200 mA max).
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter