Installation manual

5/25
5
Setup (continued),
reference
Modicon TSX Micro
automation platform 0
SDKC software
The function created must be generated under the “debug” format to be tested.
Once it has been inserted in an application and loaded to a PLC, the execution of a
function can be checked using numerous debug tools.
A specific function debug menu in C language accesses the following services:
b Breakpoint insertion.
b Step by step execution.
b Display of code with breakpoints shown.
b Display of data manipulations.
After developing, generating, then debugging the function, the last step consists of
generating a function family installation disk.
This enables the function library on the user's programming terminal to be enhanced.
Managing the versions allows the level of any functions installed on a station to be
known at any time.
These functions can be used in all PL7 languages.
This software extension enables standard functions offered by PL7 Micro, PL7 Junior
and PL7 Pro version > V4 software to be extended.
It comprises:
b A set of 3"1/2 disks.
b A bilingual user manual (English and French).
This software is supplied with a Microsoft Visual C++ software package registration
card.
Setup (continued)
Debugging the functions
Functions library enhancement
Reference
PL7 SDKC procedure creation software
Description Function Target PLC
extension
Reference Weight
kg
PL7 SDKC software
extension
Procedure written in
C language with
access to floating
point functions
Debug in PLC
PL7 Micro/
Junior/Pro
TSX Micro/
Premium
TLX L SDKC PL7 41M
0.930
P
resentation:
p
age 5/24
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter