Installation manual

4/62
4
4.4
Connections
Modicon TSX Micro
automation platform 0
Uni-Telway bus
1 TSX CSA ppp: bus cable, double shielded twisted pair. The shielding must be
connected to the earth of each device.
2 TSX SCA 50: passive T-junction box, matches the impedance when it is installed
at the end of the line.
3 TSX SCA 62: passive 2-channel Uni-Telway subscriber socket, is used for
coding the address of two connected devices, and matching the impedance when
it is installed at the end of the line.
4 TSX SCA 60/61: passive terminal block, used for intermediate devices that have
a 15-way female SUB D connector:
v TSX SCA 60 used for intermediate devices,
v TSX SCA 61 used for end devices.
5 TSX P ACC 01: connection box, used for connecting a TSX Micro/Premium
PLC to the Uni-Telway bus via the PLC terminal port. The connecting cable
(length 1 m) is integrated in the connection box. It isolates the signals (for
distances >10 m) and is used to match the end of line impedance. It is also used
to set the operation of the terminal port (Uni-Telway Master/Slave or character
mode).
6 TSX LES 64/74: cable connectors for extensions to the Uni-Telway bus, used to
connect TSX model 40 PLC processors that have an integral Uni-Telway port as
standard. They are used for coding the address of the connected device.
7 TSX SCP 114: PCMCIA card for connecting TSX Micro (1)/Premium PLCs to the
Uni-Telway bus.
8 TSX SCP CU 4030: Uni-Telway connecting cable between the TSX SCP 114
PCMCIA card (on TSX P57 p0M processor or TSX SCY 21601 module) and the
TSX SCA 50 junction box.
9 TSX SCY CU 6530: Uni-Telway connecting cable between the TSX SCY 21601
module integrated channel and the TSX SCA 62 subscriber socket.
10XBT-Z908: Uni-Telway connecting cable between the CCX 17 and the
TSX SCA 62 subscriber socket.
11TSX PCX 1031: universal connecting cable between a PC compatible (COM port,
9-way SUB D connector) and the TER or AUX port for TSX Micro/Premium PLCs
or the TSX P ACC 01 connection box (8-way mini-DIN connector).
12TSX CSC 015: connecting cable between the TSX 17 micro-PLC (via a
TSX 17 ACC 5 adapter or a TSX SCG 1161 module) and TSX SCA 62
subscriber socket.
TSX DG UTW F: this manual describes the operating principles and the architectures
of the Uni-Telway bus. It is required for setting up and installing the
Uni-Telway bus.
TSX DR NET F: this manual describes the X-Way architectures, services and
address mechanisms. It includes the coding of Uni-TE requests as well as
precautions for connecting earths for the networks. It also includes the principles
of asynchronous serial transmission.
(1) With TSX 37 21/22 PLCs.
Uni-Telway bus wiring system
4
10
222
TER AUX
6
7
2
11
9
3
1
3
8
5
12
FT 2100
TSX 17 20
Adaptor
TSX Micro
(TER terminal port)
ATV 38/58
D
evice
C
haracteristics:
p
ages 4/60 and 4/61
Description:
page 4/61
References:
page 4/63
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter