Installation manual

4/57
4
4.4
Connections (continued)
Modicon TSX Micro
automation platform 0
Fipio bus and Fipway network
1 TSX FP CAp00: trunk cable, shielded twisted pair 150 Ω (8 mm diameter) for
normal environments and use inside buildings.
2 TSX FP CRp00: trunk cable, shielded twisted pair 150 Ω and 1 x 1.5 mm
2
pair for
remote supply (9.5 mm diameter) for harsh environments and use outside
buildings.
3 TSX FP CCp00: tap link cable, shielded twisted pair 150 Ω ( 8 mm diameter) for
normal environments and use inside buildings.
4 TSX FP CG0p0: tap link connecting cable for PCMCIA TSX FPP 10/20
communication card for TSX Micro/Premium/TSX Series 7 PLCs, FT 2100
terminals and PC compatibles. Connection to the bus is via a 9-way
SUB-D connector on the TSX FP ACC3/ACC4 junction box.
5 TSX FP CE030: tap link connecting cable for TSX FPC 10 or FCP FPC 10 PC
communication card (ISA bus) for FTX 517, CCX 77/87 terminals and PC
compatibles. Connection to the bus is via a 9-way SUB-D connector on the
TSX FP ACC 3/ACC 4 junction box.
6 TSX FP ACC14: Polycarbonate IP 20 junction box: provides tap link from the trunk
cable to connect 1 device via TSX FP CCp00 tap link cable or several devices in
a daisy chain.
7 TSX FP ACC3: IP 20 box for connecting 2 PC or PCMCIA cards (TSX FPP 10,
TSX FPC 10, TSX FPP 20/200, FCP FPP 10) on a 9-way SUB-D connector.
8 TSX FP ACC4: IP 65 junction box. It also has a 9-way female SUB-D connector
for any device which is connected to the bus via a PCMCIA card (in this case, the
box is IP 20).
TSX EF ACC99: IP 65 junction box for IP 67 I/O modules, consult our Modicon
Premium automation platform catalogue.
9 TSX FP ACC2 and TSX FP ACC12: 9-way female SUB-D connector for
Fipway/Fipio connection (TSX FP ACC 2 connector for TSX 17 20 micro-PLC for
example). Used for daisy chain or tap link connection (90° output high or low, 45°
output high or low).
10 TBX BLP01: connector for TBX I/O modules (IP 20).
11 TSX LES65: connecting cable for TSX/PMX model 40 PLCs. Used for address
coding.
12 TSX FP ACC6: electrical repeater: used to increase the number of stations
(max 64) and the length of the network by creating an additional segment of up to
1000 m (a maximum of 4 repeaters in cascade giving a network length of 5000 m).
TSX EF Cppp: dust and damp proof connectors for IP 67 I/O modules, consult our
Modicon Premium automation platform catalogue.
13TSX FP ACC8M: fibre optic/electrical repeater: used to connect electrical
segments via a fibre optic link (particularly suitable for zones with a high level of
interference) or to connect a fibre optic device.
14TSX FP ACC7: Line terminator, to be installed at both ends of a segment.
15TSXFPJF020: fibre optic jumper (length 2 m). For fibre optic connection of the
TSX FP ACC 8M repeater to a patch panel. The maximum length of the fibre optic
cable (62.5/125) between 2 repeaters is 3000 m.
TSX EF ACC7: line terminator, to be installed at both ends of a segment
requiring IP 67 protection, consult our Modicon Premium automation platform
catalogue.
TSX FP ACC9: network wiring test tool. This is used for testing the continuity of
segments, the connections of the various devices and the installation of line
terminators.
Cables
Connection boxes
Connectors
Other elements
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter