Installation manual

4/55
4
4.4
Presentation (continued),
characteristics,
references
Modicon TSX Micro
platform automation 0
Fipio/Fipway optic transceiver
Fipio bus operating mode and performance on fiber optics
After configuration in Fipio mode, the processor scans the various application
devices according to the software configuration:
b Image variables of the input values and of the output command values of a
configured device are scanned as quickly as possible on the bus, whilst respecting
the existing relationships between periods of different tasks which use these devices.
b Appearance or disappearance of a configured device is detected on the bus within
a maximum time of 200 ms.
b Exchanges occur at the rate defined by the programmer, from 10 to 20 Uni-TE
messages per second.
The network cycle time is double that of the electrical bus when OZD FIP G3
transceivers are used.
Fipway bus operating mode and performance on fiber optics
The operating principle is identical to that on an electrical network, in that the number
of stations is limited to 32 and the transmission time is as follows:
b For the Common words and Shared Table services, updating of the entire
database is carried out every 40 ms maximum.
For Uni-TE message handling, the network characteristics are used to transmit a
maximum of 230 messages of 128 bytes per second.
Performances
P
resentation:
p
age 4/54
OZD FIP G3
Characteristics (with OZD FIP G3 optic transceivers) (1)
Type of bus/network Fipio bus Fipway network
Structure Type Open industrial support conforming to Fip standard
Topology
In redundant rings or in a line with simple redundant links
Access method
Producer/consumer principle
Management by a fixed arbitrator
Producer/consumer principle
Management by an automatically elected
arbitrator
Transmission Mode
Multimode (860 nanometres)
Data rate
1 Mbit/s
Medium (2)
Fiber optic 50/125 - 17 dBm or 62.5/125 - 15 dBm
Inter-repeater distance
2,500 m for 50/125 and 2,800 m for 62.5/125
Configuration No. of connection points
32 optic transceivers 20 optic transceivers
Maximum no. of devices
16 Fipio devices can be connected to the same
fiber optic transceiver
16 stations can be connected to the same fiber
optic transceiver but the maximum number of
stations is 32
No. of segments
The loop (or fiber optic line) is similar to a non cascadable segment
Length
Maximum circumference of the ring (or length of the line): 20 km
Maximum optic distance
between 2 OZD FIP G3
transceivers
1,500 m, with the following on the ring or the line: 32 optic transceivers
2,000 m, with the following on the ring or the line: < 32 optic transceivers
3,000 m, with the following on the ring or the line: 2 optic transceivers
Tap links
From the OZD FIP G3 fiber optic transceiver, the maximum length of the electrical tap link is 100 m
Services Same as page 4/56 except for the Telegram service, which is not available with OZD FIP G3
fiber optic transceiver.
References
Description Max. number of
transceivers
Connectable devices
Fipio bus
Fipway
network
Reference Weight
kg
Optic transceiver
Fipio/Fipway (3)
32 with Fipio
20 with Fipway
- TSX Micro/Premium
- TBX remote I/Os with
TBX LEP 30
- Remote Momentum I/O
- CCX 17 panels (version 2.4)
- Magelis iPC industrial PCs
- Lexium drives, etc.
TSX Micro,
Premium (with
TSX FPP 20
PCMCIA card)
OZD FIP G3 0.500
TSX Micro/Premium PLC connection components (4)
Description Use Composition Reference
Weight
kg
Fipway card TSX 37 21/22 Micro PLC, Premium processor,
Atrium coprocessor
1 type III
PCMCIA card
TSX FPP OZD 200 0.110
Fipio card agent function TSX 37 21/22 Micro PLC, Premium processor,
Atrium coprocessor
1 type III
PCMCIA card
TSX FPP 10 0.110
(1) These characteristics can be increased using mixed topologies; please consult our regional
office.
(2) Devices connected on electrical tap links are compatible with the WorldFip physical layer.
(3) For TSX FP ACC 8M fiber optic electrical repeater, see page 4/58.
(4) For accessories and connection cables, see pages
4/58 and 4/59 .
TSX FPP 20/10
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter