Installation manual

4/52
4
4.4
Software setup,
description
Modicon TSX Micro
automation platform 0
Fipio bus Agent function
Each TSX Micro/Premium PLC Fipio Agent uses 64 %MWi consecutive internal
words to exchange periodic data. The fi
rst 32 words are reserved for sending data to
the manager,
and the remaining 32 are reserved for receiving data from the manager.
PL7 Micro/Junior/Pro application-specific screens allow the configuration of the Fipio
Agent PCMCIA card. This consists of:
b Indicating the connection point number (1 to 127).
b Indicating the address at the beginning of the 64 %MW word table reserved for
sending data to and receiving data from the manager.
TSX Micro (TSX 37 21/22)/Premium PLCs have a slot in the processor for a type III
PCMCIA communication card. This can be fitted with a TSX FPP 10 Fipio bus
connection card.
The TSX FPP 10 card comprises:
1 A protective cover.
2 A removable cover with fixing screws giving access to the 20 way miniature
connector.
3 Two indicator lamps:
v ERR lamp: card fault, link fault,
v COM lamp: transmission or reception of data.
Connector to be ordered separately:
4 TSX FP CG 010/030, 1 or 3 m cable for connecting the TSX FP ACC 4 tap junction
(on 9-way SUB-D connector).
Software setup
Description
2
3
1 4
P
resentation:
p
age 4/50
Characteristics:
page 4/51
Description:
page
4/53
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter