Installation manual

4/15
4
4.1
References,
dimensions
Modicon TSX Micro
automation platform 0
Ethernet network and TCP/IP Modem serial link
(1) Requires a TSX 37 10/20/21 PLC with a version u 2.0 operating system, supplied with a
TSX ETZ CDN 003 link cable (0.35 m in length). These modules should be supplied with
c 24 V. (See supply process page 2/61).
(2) Supplied with CD-Rom including the FactoryCast V2.2.1 software, the Ethernet
Transparent Ready Part A, the user manual for the Ethernet TSX ETZ 410/510 modules.
(3) Add the letter U to the end of the reference for CSA 22.1, NFPA 70 and UL approved cables
(flame-retardant).
(4) Free wire on the side of the TSX SCA 50 connection box.
(5) If the 0.35 m of TSX ETZ CDN 003 cable, supplied with the TSX ETZ 410/510 modules, is not
suitable, it is possible to use the TSX CX 100 cable (10 m in length). In this case, attach an
8 pin RJ45 connector (category 5) to the end of the free wire.
Ethernet TCP/IP network modules
Designation Data rate and communication profile Integrated Web Server References Weight
kg
Diagnostics Web user
pages
Ethernet modules
for Micro
TSX 37 10/21/22
PLC
(1), (2)
Ethernet 10/100 Mbps or
Modem 56 Kbps
Uni-TE on TCP/IP or Modbus
on TCP/IP
yes – TSX ETZ 410 0.280
yes 8 Mb available TSX ETZ 510 0.280
Connection cables and accessories
Designation From To Use Length References
(3)
Weight
kg
Ethernet twisted
shielded cables
(3)
TSX ETZ 410/510
module
(RJ45 connector
add. ETH)
Ethernet Hub (RJ45
connector)
See page 4/21
Link to Ethernet
network
2 m 490 NTW 000 02 –
5 m 490 NTW 000 05 –
12 m 490 NTW 000 12 –
40 m 490 NTW 000 40 –
80 m 490 NTW 000 80 –
RS 485 Uni-Telway
cables
TSX ETZ 410/510
module
(mini DIN
connector add.
TER)
Compatible PC
(female SUB-D
9 pin connector)
Uni-Telway bus link
via terminal port
2.5 m TSX PCU 1031 0.140
TSX SCA 50
connection box
Uni-Telway bus link
via terminal port
10 m (4) (5) TSX CX 100 –
Terminal port
(TER) connection
box
Uni-Telway
derivation bus
TSX ETZ 410/510
module or TSX
Micro PLC
(mini DIN connector
add. TER)
Uni-Telway bus
isolation signals for
buses > 10m in length,
end of line adaptation,
bus cable derivation
1 m (TER port
link cable)
TSX P ACC 01 0.690
Passive derivation
box
Uni-Telway
derivation bus
TSX ETZ 410/510
module
(mini DIN connector
add. TER)
Derivation and
prolonging of bus
cable, end of line
adaptation
– TSX SCA 50 0.520
T
SX ETZ 410/510
TSX P ACC 01
TSX SCA 50
P
resentation:
p
age 4/6
Description:
page 4/13
Functions:
pages 4/8 to 4/12
Characteristics:
page 4/14
Dimensions, mounting
TSX ETZ 410/510 modules Mounting on profiled AM1 DE200
or AM1 DP200 or on AM1 PA mounting plate
(1) 136.2 mm with profiled AM1 DP200
(2) Assembly on AM1 PA mounting plate
150
116,7
16 5,4
4
58,55
5,15
140
39,83
151,5
88,9
30,7
34,63
143,7 (1)
132,7 (2)
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter