Installation manual

4/5
4
0
Uni-Telway multicomponent industrial bus Asynchronous serial links
Uni-Telway Character mode
RS 485 non-isolated
RS 485 isolated via TSX P ACC 01 tap
RS 232D
RS 485 isolated
20 mA CL
RS 232D RS 485 isolated
RS 422
20 mA CL
Master/slave –
19,2 Kbit/s max. 0,3...19,2 Kbit/s 1,2...19,2 Kbit/s
Double twisted shielded pair – Double twisted shielded pair
5 (excluding programming terminal) Point-to-point
in RS 232D,
28 in RS 485,
16 in 20 mA CL
Point-to-point Point-to-point in
RS 422
Multipoint in RS 485
Point-to-point
Multipoint
10 m non-isolated
1300 m isoled
15 m in point-to-point
1000 m in RS 485
1300 m in 20 mA CL
15 m 1000 m 1300 m
1 max.
- Uni-TE Client/Server 240 bytes (128 bytes on terminal port)
- Application-to-application 240 bytes (128 bytes on terminal port)
- Transparency of all devices on X-Way architecture via the master
- 4096 characters max.
- 7 or 8 bits, 1or 2 stop bits
- Even, odd or none parity
TSX 37-05/08/10
PLC bases
TSX 37-21/22 PLC bases
Built-in link on terminal port Type III PCMCIA card
TER
terminal port
AUX
terminal port
TSX SCP 11p
(1)
TSX SCP 111 TSX SCP 114 TSX SCP 112
4/63 4/65
(1) At the end of reference, replace p by 1: RS 232D, by 2: 20 mA CL or by 4: isolated RS 485.
1
2
1
2
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
efesotomasyon - telemecanique inverter