Specifications

12
PAYOUT OPTIONS
PAYOUT:
There are a total of eight different ways that this
menu can appear, as seen in the Program Flow
Chart on pgs. 6-7 in the row of boxes under the
‘Payout’ box, depending on what Hardware Mode
the unit is set to, the number of hoppers, and the
type(s) of coins or tokens in the hopper(s). If not
already done, please select an operating mode
for the changer PRIOR
to completing the ‘Payout’
settings (Refer to the Selecting an Operating
Mode section).
Simple Vending Mode (1 Hopper):
Press Up or
Down (buttons #1 or #2) to set the value of the
tokens in the hopper. A token’s worth can be set
to anywhere between 1¢ and $20. Press the
Select button to save the value chosen.
Example: Set Token = $0.25 to pay out 4
tokens per dollar.
Simple Vending Mode (2 Hoppers):
Select a
value for the tokens in the left hopper (‘Token
L’), and enter the denomination of the coins in
the right side hopper (‘Change R’). Both can be
set to values between 1¢ and $20.
Example: With the mode set to ‘many’, set
Token L = $0.30, and Change R = $0.05 (fill
the right hopper with nickels). Inserting a
$5 bill will pay out 16 tokens ($4.80) and 4
nickels ($0.20). With the mode set to ‘one’,
the payout will be 1 token ($0.30) and 94
nickels ($4.70) for the same $5 bill.
Game Tokens Mode (1 or 2 Hoppers):
If changer
is equipped with two hoppers, both should be
filled with the same tokens for this mode. Here,
set the number of tokens to be paid out per
money denomination accepted, starting with the
quarter and proceeding, in increasing order, all
the way to the $100 bill (Only the denominations
that have been set for acceptance in the ‘Bill’ and
‘Coin’ menus and on the validator will show up).
Then, continue by setting the number of tokens
to be paid out for up to 4 different “Party
Tokens”. Press Up or Down (buttons #1 or #2),
then Select to set the payouts. Each number can
be set to anywhere between 0 and 999 tokens.
Example: Set $Q = 1, $1 = 4, $5 = 22, and
$TK1 = 100. This will pay out 4 tokens per
dollar with a 2 token bonus for changing a
$5 bill, and 100 tokens upon acceptance of
“Party Token” #1.
Simple Changer Mode (1 Hopper, or 2 with same
coins): Enter the denomination of coins in the
hopper(s). This value can be set to anywhere
between 1¢ and $20. Use the Up button to
increase the value and the Down button to
decrease it, and push the Select button to save.
Example: Set Change = $0.25 to pay out 4
quarters per dollar.
Simple Changer Mode (2 Hoppers with different
coins): Begin by entering the denomination of
coins in the left (‘Change L’) and right (‘Change
R’) hoppers. These values can be set to anywhere
between 1¢ and $20. Next, set the number of
coins from each to be paid out per dollar
for each
changing operation. The left hopper is first
(‘Payout L’), then the right (‘Payout R’).
Note: The ‘Payout’ settings override the ‘Change’
value settings, so be sure to correctly enter how
many of each coin you want dispensed per dollar.
Example: Set Change L = $0.25, Change R =
$0.05, Payout L = 3, and Payout R = 5 to
pay out 3 quarters and 5 nickels per dollar
.
Advanced Changer Mode (2 Hoppers w/ different
coins): First, enter the denomination of coins in
both the left hopper (‘Change L’) and the right
(‘Change R’). These values can be set to
anywhere between 1¢ and $20. Then, set the
number of coins to be paid out of each hopper
per money denomination, starting with the left
hopper payout per quarter (‘$Q L’), then the right
hopper payout per quarter (‘$Q R’), then left and
right payouts per dollar, and so on up through
payouts per $100 bill. Those denominations that
are not enabled are skipped. Note: The ‘Payout’
settings override the ‘Change’ value settings, so
be sure to correctly enter how many of each coin
you want dispensed per denomination.
Example: To pay out exactly 5 nickels per
denomination, with the balance to be paid in
quarters, the settings would be: Change L =
$0.25, Change R = $0.05, $Q L = 0, $Q R =
5, $1 L = 3, $1 R = 5, $5 L = 19, $5 R = 5,
$10 L = 39, $10 R = 5, etc…
Advanced Vending Mode (1 Hopper, or 2 with
same tokens): Using the Up and Down buttons,
set the value of the tokens in the hopper(s). They
can be set to values between 1¢ and $20.
Following this, enter the number of tokens to be
dispensed for each accepted bill denomination
starting with $1 and increasing, in sequence, to
$100. Any number between 0 and 999 can be
chosen for each, giving you the option of
including discounts or bonus payouts starting at
$1 bills.
Example: Set Token = $0.50, $1 = 2, $5 =
12, and $10 = 25 to pay out 2 tokens per
dollar with a 2 token bonus for five dollar
bills, and a five token bonus for ten dollar
bills.
Advanced Vending Mode (2 Hoppers: Tokens L
and Coins R): This mode requires that the left-
side hopper contain tokens, and the right-side
hopper contain coins for change. First, select the
value of the tokens in the left hopper (‘Token L’),
and then enter the coin denominations in the
right hopper (‘Change R’). Then, in sequence,
enter the desired number of each to be paid out
for each bill value accepted by the validator. The
program will prompt for each value starting with