NoTouch™ Elite NT2800 User’s Guide
Welcome to NoTouch™ Elite NT2800 Introduction Thank you for selecting the NoTouch™ Elite NT2800. This is an easy-to-use USB 2.0 mobile hard drive that allows you to backup, share and exchange huge amounts of data. It is ideal for storing all your important files and favourite media collection. NoTouch™ Elite NT2800 is now more secure and more elegant. Equipped with military-grade 128-bit hardware encryption, it features user-selected password protection which scrambles files before they are stored.
Drag & Drop Restore File version control Custom file types and filtering Include / Exclude options Product Specifications Supported operating systems Interface Capacity Hard disk type Physical Dimensions (mm) Operating Environment Limit Activity Indicator Power Indicator Windows® XP/Vista®/Windows 7 SATA to USB 2.0 Depends on model SATA 5400 RPM 75 x 122 x 15 Temperature: 10°C~40°C Relative Humidity: 20%~80% White LED Red LED Contents of box NoTouch™ external drive with pre-formatted 2.
Connecting and Disconnecting the NoTouch™ drive Use the USB 2.0 cable to connect the NoTouch™ external drive to any free USB port of your PC or notebook. Enable & Disable Encryption of the drive CAUTION! The Aes Lock software uses your password to electronically lock and unlock your drive. If you forget your password, you will not be able to access the data that is on your drive or write new data to it. You will have to erase the drive before you can use it again.
Step-I : Insert the software CD comes together with the device. Right-click on NT2800Armour.exe and choose Run as administrator. Step-II : Click on Load ISO File, select NoTouchArmour.iso from CD-Drive and click on WRITE button. When asking for confirmation, click on OK button.
Click on EXIT button when the procedure stop. Unplug the device.
Step-III : Connect the device again. Click on Start > Run > type diskmgmt.msc. Look for the external disk. It shows as “Not Initialize”. Right-click on your external drive and choose Initialized Disk Click on OK button to make the device Online.
Right-click on this unallocated volume and choose New Simple Volume… 8
Follow the following steps to format the external hard drive.
The external hard drive is now Healthy as shown. Step-IV : After completing all-above steps, go to my computer window. You’ll also see a virtual CD drive is created. Double-click the drive to open the content. Right-click on Aes Lock.exe and choose Run as administrator.
Aes Lock program will appear as shown below and follow the steps; Set your own password here. Choose your preferred file system FAT32 or NTFS.
Step-V : Click on Mount button from Aes Lock program, 13
Now, the hard drive is ready with the selected password. When you like to disconnect the drive, click on Dismount button. The password protected partition will be disappeared from your system.
How to Disable Encryption Feature CAUTION! NT2800Armour.exe will delete all the parttions from your external drive. After that, you will not be able to access your old data that is on your drive. The following steps will format your external hard drive and the partition utility will delete all the data from your external hard drive. Before following the procedure, it is strongly recommend you to copy all the data from your external hard drive to your local drive.
Step-II : Insert the software CD comes together with this unit. Right-click on NT2800Armour.exe and choose Run as administrator. Click on Load ISO File, select NoTouchArmour.iso from CD-Drive and click on ERASE button.
When the procedures stop, click on EXIT button. Unplug the device. Step-III : When you connect the drive, there will be no more virtual CD drive.
Right-click on the Unallocated volume and choose New Simple Volume… 18
Follow the steps below; 19
After completing the procedure, the external drive can be seen in Disk Management as Healthy and it can be used with no encryption.
Disconnecting the External Drive NoTouch™ Elite NT2800 external hard drive is warm-swappable. It can be disconnected without turning off your PC. To disconnect your drive safely, perform the following steps: Windows Users Double-click the Safely Remove Hardware icon in the system tray at the bottom of the desktop. For some PCs this is called the Unplug Hardware or Eject Hardware icon. Double-click USB Mass Storage Device. Select the NoTouch drive.
