User`s guide

Page | 8
Default
This button has 2 functions:
 IP Address Reset. If the MYXERVER™ PRO’s IP address is lost, press and hold this button
for 2 seconds. The IP address will be reset to the default (DHCP client) and the system
will beep once to indicate that reset has occurred.
 Password Reset. If the MYXERVER™ PRO administrator’s password is lost, press and hold
the button for 10 seconds. The password will be cleared, and the MYXERVER™ PRO will
beep twice.
USB Port
You can connect 2 different devices here:
 USB hard drive or flash drive.
 USB Printer (Multi-function or all-in-one printers are not supported)
USB Copy
 USB Direct Copy.
 If you connect a USB storage device to MyXerver™ Pro, and press the button for 2~3
seconds, the contents of the USB storage device will be copied onto MyXerver™ Pro.
Ethernet Port
Use this port to connect the MYXERVER™ PRO to your router/switch/hub.