User`s guide

Page | 33
E. HOW CAN I ADJUST DAT E AND TIME SETTING
To set date and time, go to Administration, System, and Time Settings
If NTP Server is using some NTP sites (eg. time.nist.gov or time.windows.com), choose this default setting as None as
shown below.
After changing NTP Server’s default value as None, you can change the time setting.
F. HOW CAN I RESTORE MY XERVER™ PRO AFTER FORMATTING THE HARD DRIVE
To recover MyXerver™ Pro files after formatting the Hard Drive, follow the steps below:
1. Reset MyXerver™ Pro by pressing default button located at the back of the unit for 10~12 seconds, then the unit
will reboot automatically.
2. Connect MyXerver™ Pro direct to computer using network cable if you have more than 1 unit of MyXerver™ Pro
3. Insert MyXerverPro CD into computer CDROM drive and run MX3800 Setup.exe program.
4. Follow installation steps and select “Restore” option
5. Reboot MyXerver™ Pro after installation
G. HOW TO GET TECHNICAL ASSISTANT
If your problem or problems are not included in this FAQ, you can get assistance by sending email to
[e-mail]