User`s guide

Page | 27
Enable Media Server
If enabled, the MyXerver™ Pro can be located by compatible Media Adapters, using
the UPnP AV standard developed by Intel and its partners. Media content on the
MyXerver™ Pro (in the Content Directories specified below) can then be accessed
and played by the Media Adapters.
Server Name
Name of the Media Server that is displayed on client devices. Note that some
special characters (e.g. " \ : | , ') and 2-byte characters cannot be used in it.
Content Directory
Directories where the Media Server shall scan for media content is under
“public/media”
B. WINDOWS ACTIVE DIREC TORY SUPPORT
MyXerver™ Pro supports Windows Active Directory (AD). User accounts from Windows AD domain can be imported to
MyXerver™ Pro. This saves administrator’s time to create individual user’s account.
Click Adminstration, and select File and Print, File Server options to reach the screen below. Select “JoinDomain (AD) under
“mode select” to activate this feature. Reboot the MyXerver™ Pro after making this selection.
Please check the following points before and after joining AD domain:
- MYXERVER™ PRO and AD server must be with same time zone. The time difference between the two must be less
than 5 minutes
- After joining AD domain, you must login as Domain_Name\UserName to access Network. Local users of MyXerver™
Pro cannot access the server by Network
- After joining AD domain, “everyone” rights will no longer work. It is not supported in AD Domain.
C. AJAXPLORER
One of the applications preisntalled into MyXerver™ Pro is Ajaxplorer 2.5.4. This application allows users to remotely
access files in directory in \public from any computer with an internet connection. The default login name is “admin”
password is ”admin”. Please note that the user account for AjaXplorer is different from MyXerver™ Pro account. Adding or
removing users from AjaXplore will not change the user account in MyXerver™ Pro. Even “admin” in AjaXplorer is
different from “admin” in MyXerverPro although both has same name. Details about how to make MyXerver™ Pro
accessible from internet are in the next chapter.
Choose “JoinDomain(AD) to activate
this feature