User`s guide

Page | 12
Server Name
The default name is MyXerverPro. Change this to your own preferred server
name.
Obtain an IP address
automatically
(DHCP Client)
Select this only if your LAN has a DHCP Server which can allocate IP address
automatically.
Fixed IP Address
You need to enter the following data:
IP address: The utility will suggest an unused IP address within the address
range used on your LAN. If you wish, you can change this, but you must
ensure the address is unused.
Network Mask: This must match the value used by PCs on your LAN.
Gateway: This must match the value used by PCs on your LAN.
DNS Server: This must match the value used by PCs on your LAN.
5. Click Next to continue. The following screen will then be displayed. Specify the correct time zone, date and time.
Select this if your LAN has a
DHCP Server, otherwise select
“Fixed IP Address”
Suggested values are compatible
with your LAN. Suggested IP
address is currently used.