User`s guide

Page | 11
A list of MyXerver™ Pro network storage on your network will show on the left side. The right side displays
details of the currently selected MyXerver™ Pro. If the desired MyXerver™ Pro network storage is not listed,
check the following:
• The MX3800 has finished the start up and boot process.
• Your PC and the MX3800 are on the same LAN segment (there is no Router between your PC and
the MX3800).
Otherwise, select the desired MX3800 (default name of MyXerverPro), and click the "OK" button. The password
verification screen will appear. Type the correct password to continue. The default password for admin is
“admin”
4. The following screen will then be displayed. Select your desired IP configuration.