User's Manual

RFDEAC_CT7_A5_USR_MAN_REV_A

5. INSTALLATION

There are several simple and essential rules mentioned, which keeping will assure very

good parameters of

the

deactivation.

• Don’t install deactivation antennas/pads to the near proximity of metal

objects. There should be no metal object under the deactivation antenna/pad

closer than from 3 to 4 cm. There should be no metal object next to the

deactivation antenna/pad closer than from 5

to 10

cm.

• Don’t install the deactivation

antennas/pads

to the close proximity of the other

electronic devices.

• Don’t install wire between the deactivator unit and the deactivation

pad/antenna along with the

others

cables.

• Pay your utmost attention to install deactivators as far as possible from the RF

EAS system. The particular minimum distance depends mainly on the quality of

used RF

EAS

system.

5.1 FAULTS

CLE

ARING