User's Manual

3. DEACTIVATOR PARAMETERS AND THEIR MUTUAL INTERACTIONS

3.1 SENSING AND DEACTIVATING POWER

The

deactivator

needs two output power

levels

for its

operation.

RX Sensitivity Level - Is used for the detection of sticker labels and tags. The bigger this

power is the higher detection height is reached, but the higher the probability is, that the

sticker label is deactivated before its detection. The level of sensing output power (RX) is

found experimentally by reaching acceptable detection height and probability of

successful detection by

mod

ifi

mmer RX PWR

mmer

e of this

parameter is set at 50

NOTE: All Power settings MUST be left at default settings in USA. USA versions do

n o t a l l o w f o r p o w e r a d j u s t m e n t s

Deactivation output power - Is used for deactivation

of sticker labels. This level is set at manufacture. Bad

influence usually comes out as EAS system sensitivity

decreasing or false alarms making. It is necessary to

perform proper synchronization

between EAS system

and the

deactivator.

Pic. 1 - The comparison - possible levels of

‘sensing power’ and ‘deactivation power’