User's Manual

8
RFDEAC_CT7_A5_USR_MAN_REV_A
11
Pic. 6 - Location of LEDs on the board.
7. DE CL ARATION
7.1 EQUIPMENT MODIFICATION CAUTION
Equipment changes or modifications not expressly approved by manufacturer, the party
responsible for FCC &/or CE compliance, could void the user's authority to operate the
equipment and could create a hazardous condition.
7.2 FCC COMPLIANCE
“This equipment has been tested and found to comply with the limits for Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction's manual, may cause interference to radio communications.
Operation of this equipment in a residential area is likely to cause interference in
which case the user will be required to correct the interference at his own
expense. The user is cautioned that changes and modifications made to the
equipment without approval of the manufacturer could void the user’s authority
to operate this equipment.”