User's Manual

ManualsBrandsUniversal Surveillance Systems ManualsElectronics8.2 MHz Mirage System

MONO82_USR_MAN_REV_A

This document was created to provide intended recipient documentation of requested device for technician purposes only. Any other usage of this document is an illegal and unlawful act. This document is a confidential and proprietary

document of Universal Surveillance Systems and consist of i nformation what can be protected by copyrights or the others intellectual property protection instruments of the others subjects. All other informa tion, what are not generally

known ones, is an intellectual property of Universal Surveillance Systems. This document including any and all attachments hereto is intended solely to be used by individual or entity to which it is addressed. If the reader of this

document is not the intended recipient, or an employee or agent responsible for delivering this document to its intended recipient, you are herewith notified that any dissemination, distribution, copying or retention of this document

or the informa tion contained her ein is strictly prohibited. If you have received this document in error, please notify us at service@un ivser aleas.c om i mmediately and permanentl y delete or/and destroy the original and any copy or

printout thereof.

COM port needs to be selected, click "Search" button and the application will scan and

display the

correct

one.

Socket communication - Here you can connect device remotely via internet connection

with information and login authorized from

provider of

eComm.

The

hardware

key is

connected

to the 6-pin

RS232 Serial connector

on the

control

unit and

then to an available USB port on the

PC.

Pic. 3 - Hardware key

6. RF APPLICATION 8.2MHz MIX V3.4

6.1 SETTINGS

Settings page allows the user very basic control of the device as well as tests its

functionality.

Communication - Sets the type of communication, either locally or remotely through the

internet.

COM port -

Allows

the user to

select

the

correct

COM port

manually through

scroll

bar or

automatically by clicking on the “Search” button. The “Connect” button connects the PC

to the

device

locally or

remotely

and

“Disconnect” disconnects

it.

Make sure

to disconnect

the device before unplugging it to avoid freezing of the computer and/or loss of data.

List of device - Shows list of connected devices. Here you can also change the address of

device, simply with button "Change

address".

Refresh all parameters

Updates all

data from

the controller unit with the latest

values.

Test - Clicking on this buttons will test the EEPROM and RAM memory. If the memory is

broken, contact

manufacturer.