User's Manual

5
MONO82_USR_MAN_REV_A
This document was created to provide intended recipient documentation of requested device for technician purposes only. Any other usage of this document is an illegal and unlawful act. This document is a confidential and proprietary
document of Universal Surveillance Systems and consist of i nformation what can be protected by copyri ghts or the others intellectual property protection instruments of the others subjects. All other informa tion, what are not generally
known ones, is an intellectual property of Universal Surveillance Systems. This document including any and all attachments hereto is intended solely to be used by individual or entity to which it is addressed. If the reader of this
document is not the intended recipient, or an employee or agent responsible for delivering this document to its intended recipient, you are herewith notified that any dissemination, distribution, copying or retention of this document
or the informa tion contained her ein is strictly prohibited. If you have received this document in error, please notify us at service@un ivser aleas.c om i mmediately and permanentl y delete or/and destroy the original and any copy or
printout thereof.
9. - Heartbeat LED - Blink slowly in normal run mode. Blink fast (for 9 sec.) when you turn
ON the electronic board or during the quick adaptation (for 4 sec.) (system adaptation to
environment interference) or during the time when is the Transmitter (TX) turned OFF.
4. ANTENNAS
The antennas that are connected with MONO RF 8,2MHz electronic board are always
configured as multicoil transceiver devices. They combine transmit and receive function
with one pedestal.
*NOTE : See section 6.5 MONO 8,2MHz -> Synchro.
*
All settings about the antenna fine tuning and synchronization are performed in RF
application 8.2MHz MIX V4.0.
5. CONNECTING THE EL. BOARD
*NOTE: Please note that the device must be connected to the PC as long as you
*
keep configuring it. Device is removed after configuration.
The MONO 8.2MHz system is configured and tuned mostly by software. The latest version
of RF application 8.2MHz MIX should be installed before connecting to the control box.
Electronic board is connected to the PC with a USB Hardware Key which is required for
security purposes or with eComm via internet connection. When you start the application,
you will see basic connection settings window.
Communication - Choose according to device which will
mediate the communication. Serial includes devices with
RS485 or RS232 interfaces, that provides USB connection with
computer. Internet includes devices as eComm that provides
remote server control via internet connection.
COM port - Choose number of USB port that is set for Serial
communication in you computer. If you are unsure of what
Pic. 2 - Basic connection
settings window