User's Manual

4
MONO82_USR_MAN_REV_A
This document was created to provide intended recipient documentation of requested device for technician purposes only. Any other usage of this document is an illegal and unlawful act. This document is a confidential and proprietary
document of Universal Surveillance Systems and consist of i nformation what can be protected by copyrights or the others intellectual property protection instruments of the others subjects. All other informa tion, what are not generally
known ones, is an intellectual property of Universal Surveillance Systems. This document including any and all attachments hereto is intended solely to be used by individual or entity to which it is addressed. If the reader of this
document is not the intended recipient, or an employee or agent responsible for delivering this document to its intended recipient, you are herewith notified that any dissemination, distribution, copying or retention of this document
or the informa tion contained her ein is strictly prohibited. If you have received this document in error, please notify us at service@un ivser aleas.c om i mmediately and permanentl y delete or/and destroy the original and any copy or
printout thereof.
3. EL. BOARD DESCRIPTION (HW:N:6163, REV.8.3; SW:V3.4)
9.
Pic. 1 - El. board description
1. - Terminal of external synchronization from/into another el. board. ( for install and
service only)
2. - Terminal that drive external speaker and LEDs or lights to provide audio and visual
alarms.
3. – Terminal is not used in the USA
4. - RS-232 interface ( for install and service only)
5. - Trimmer that adjust the volume of external speaker.
*NOTE : This is the only manual tuning required for normal installation!
*
6. - Terminal for power 15VAC supply, with consumption of at least 300mA.
7. - ON/OFF power LEDs status.
8. - Transceiver antenna terminal drives two unicoil antennas.