User's Manual

3
MONO82_USR_MAN_REV_A
This document was created to provide intended recipient documentation of requested device for technician purposes only. Any other usage of this document is an illegal and unlawful act. This document is a confidential and proprietary
document of Universal Surveillance Systems and consist of i nformation what can be protected by copyri ghts or the others intellectual property protection instruments of the others subjects. All other informa tion, what are not generally
known ones, is an intellectual property of Universal Surveillance Systems. This document including any and all attachments hereto is intended solely to be used by individual or entity to which it is addressed. If the reader of this
document is not the intended recipient, or an employee or agent responsible for delivering this document to its intended recipient, you are herewith notified that any dissemination, distribution, copying or retention of this document
or the informa tion contained her ein is strictly prohibited. If you have received this document in error, please notify us at service@un ivser aleas.c om i mmediately and permanentl y delete or/and destroy the original and any copy or
printout thereof.
1. SAFETY GUIDELINES
Operate the system only as described in these operating instructions. Damage to
hardware due to improper use may result in loss of warranty.
WARNING! Do not open the antenna el. board cover while it is connected to
main power. RISK OF ELECTRIC SHOCK!
CAUTION! When connecting or disconnecting antennas make sure that el. board
!
is switched off.
CAUTION! Do not disconnect the connectors from el. board unless adapter has
!
been disconnected from main power.
CAUTION! Only USS authorized professional technicians can install and/or service
! this system
2. BASIC INFORMATIONS
ABOUT: This reference manual settings procedure, basic tuning for put into operation of
the MONO RF 8.2MHz electronic board.
USE: The system MONO RF 8.2MHz electronic board is invented for protection of goods in
stores entry/exit and it works in frequency range of 8.2 MHz. MONO 8.2MHz detects all
kinds of tags from different producers, i.e. hard, soft and paper, which are intended for
radio frequency systems with operating frequency of 8.2 MHz. The system MONO 8,2MHz
consists of one mechanical pedestal and one electronic board. For higher number of
systems, synchronization is performed by a two-wire cable or wireless by the setting in RF
application. MONO 8.2MHz can operate even close to modern deactivators of paper tags
without any reduction of sensitivity.
WORKING PRINCIPLE: Device transmits short high-frequency pulses and receives signals
from tags which are located in the detection field. Radio-frequency system is designed for
detection of RF tags and labels working on 8.2 MHz frequency. Detected tags activate
sound and light alarm.