User manual

PAT700 Total Organic Carbon Analyzer – Setup Page 81
Anatel Operator Manual
5.11 Factory
The factory icon enables factory personnel to enter information that may not be changed by
other users. Information on the factory dialog boxes can be viewed by any user but can be
changed only by a factory user.
Entry into the factory dialog box for the purpose of changing the settings requires entry of the
user ID and password. Touching the cancel icon enables read-only access to factory settings.
See Chapter 10.
General tab
Figure 5-30 Factory settings dialog box, general tab
Model number text box displays the PAT700 model number.
Serial number text box displays the PAT700 serial number.
Factory calibration date text box displays the date of the last factory calibration in “yyyy-
mm-dd” format. The date format will vary depending on the language selection.
Export oxidation buffers icon copies all oxidation buffers (up to five) to a connected USB
flash drive. Before copying begins, the analyzer verifies that there is data to export and that a
USB flash drive is inserted into the analyzer’s USB port.
Return icon returns you to the setup dialog box.