User manual

PAT700 Total Organic Carbon Analyzer – Setup Page 73
Anatel Operator Manual
Print security settings icon prints the user settings for all users except administrator and
factory users.
Return icon returns you to the setup dialog box and saves the changes. Any changes are
noted in the audit trail.
Figure 5-20 Edit user information dialog box
User’s full name text box allows you to type from 5 to 20 alphanumeric or symbol
characters. The default value is blank.
User ID text box allows you to type from 5 to 15 alphanumeric or symbol characters. The
default value is blank.
Password text box allows you to type from 5 to 15 alphanumeric or symbol characters. The
default value is blank.
Confirm password text box allows you to verify the new password. You may enter 5 to 15
alphanumeric or symbol characters. The field is case sensitive. The default value is blank.
When you enter a character, only the * symbol appears for each key touch.
Change password checkbox forces the specified user to change his or her password at the
next logon. The default setting for this option is disabled. Any time the password entry is
modified, this option is enabled.
• If a change was made to the password, both passwords in the password and confirm
password boxes must match. The new password may not be the same as any of the
passwords in the password history list.
• A changed password triggers an entry in the audit trail but does not list the old or new
password. The new password and date are added to the password history list.
Return icon returns you to the security settings dialog box and saves the changes. The ID
and user name must be unique. Any changes are noted in the audit trail.
Cancel icon returns you to the security settings dialog box. All changes are discarded and no
entries are made in the audit trail.