User manual

PAT700 Total Organic Carbon Analyzer – Run Modes Page 51
Anatel Operator Manual
4.7 Manual TOC Sample
A TOC analysis can be performed manually by touching the TOC Manual Sample icon. Upon
touching the TOC manual sample icon the analyzer will immediately stop its current operation
and run one TOC analysis. Upon completion of the this analysis the analyzer will return to the
mode currently selected under the run mode screen.
Figure 4-7 Run mode screen with manual sample
4.8 Self clean mode
To access self clean mode, touch the self clean icon to open the self clean setup dialog box.
Timed checkbox allows you to select timed or manual self cleaning.
Enter time text box allows you to enter the amount of time that will elapse during the timed
self cleaning. If a checkmark is present in the timed checkbox, touch the enter time text box,
then enter the desired amount of time for the self cleaning.
If a checkmark is not present in the timed checkbox, the self cleaning continues until it is
stopped by the user.
Figure 4-8 Self clean setup dialog box