User manual

Page 48 Run Modes – PAT700 Total Organic Carbon Analyzer
Operator Manual Anatel
4.2 Accessing run modes
To access run modes, follow these steps:
1) At the home screen, touch the << icon to open the sliding toolbar.
2) Touch the run mode icon.
3) At the run mode dialog box, touch the radio button that represents the desired run
mode. See Figure 4-2.
Figure 4-2 Run mode dialog box
NOTE
Normal operating modes do not apply when "Control with digital inputs" is selected in
the TOC setup dialog box under the Digital Control tab. Refer to Digital control tab,
page 56.
4.3 Online TOC mode
In online TOC mode, the home screen highlights the TOC reading, with conductivity,
temperature, sample time, trend, and curve type displayed in smaller text. See Figure 4-3.
Figure 4-3 Home screen, current tab, online TOC mode