User manual

PAT700 Total Organic Carbon Analyzer – PAT700 Default Settings Page 183
Anatel Operator Manual
Appendix D: PAT700 Default Settings
Table D-1 Default settings
TOC Setup Default Setting
Flush time 1 minute
Cycle time 0
Use pump Disabled
Bypass during analysis Disabled
Average last results Disabled
Flow during idle With conductivity
Control with digital inputs Disabled
Stabilization - Time between analysis 2 hours
Stabilization - Time 10 minutes
System Settings Default Setting
Instrument name PAT700Sensor
Language English
Time format 24-hour
Temperature display ºC
Conductivity display Uncompensated Conductivity
Sounds None
Static TCP/IP address 192.168.0.105
Static gateway 255.255.255.0
DNS server Blank
WINS server Blank
DHCP Enabled
Alarm Setup Default Setting
TOC upper limit 500 ppb
TOC enabled Enabled
Conductivity alarm Enabled