User manual

PAT700 Total Organic Carbon Analyzer – Maintenance and Troubleshooting Page 171
Anatel Operator Manual
• The instrument’s serial number.
• Sample resistivity and temperature.
• Current and historical TOC data.
• Current and historical alarm codes.
• A setup printout.
• Process conductivity or resistivity and temperature.
• Current and historical calibration, validation and system suitability results.
• Any other significant changes in operating conditions.
If existing problems warrant equipment return, contact Hach Company at:
Hach
5600 Lindbergh Drive
Loveland, Colorado 80538
• U.S.A.Voice +1 541.472.6500
• Toll free: 1.800.866.8854 (USA/CA)
• FAX: [phone]
6:00 AM to 5:00 PM Pacific Time Monday through Friday
•Email: [e-mail]
Global Headquarters
Service Department
6, route de Compois, C.P. 212,
CH-1222 Vésenaz, Geneva, Switzerland
• Telephone: [phone]
• FAX: [phone]
• Website: www.hach.com
Return procedures
To return the Anatel PAT700 TOC Analyzer for service, first obtain a return material
authorization number (RA#). The RA# is necessary for any analyzer that requires repair or
calibration by an authorized service center. Include the RA# on the shipping label when the
analyzer is returned.
While the RA# process is described in this section, for the most up-to-date RA# process
information, including copies of all required forms, call Hach at 800.866.7889 or
+1 541.472.6500.
CAUTION
Chemical hazard! Failure to dispose of hazardous waste by-products in accordance
with applicable regulations can cause exposure to poisonous chemicals, resulting in
severe environmental and property damage or personal injury. Adhere to applicable
local, state, and federal regulations to ensure proper disposal of hazardous waste by-
products.