User manual

PAT700 Total Organic Carbon Analyzer – Signing On and Off Page 141
Anatel Operator Manual
Chapter 10 Signing On and Off
If security is enabled, to access configuration and analyzer parameters, you must log on the
system. Use the password dialog box to log on to the system.
Four different user types may access the system: guest, operator, administrator, and factory.
Only operator users may be added or deleted from the system. Passwords can be assigned
to an operator and administrator. Guest are those without passwords. The factory password
is reserved for Hach service and support only.
• Guest. This user type is any user who does not have a password and can not log on to
the system. This user may access most areas and view information but is not allowed
to modify any settings or initiate any operations when security is enabled. Guests have
no access to the security settings dialog box when security is enabled.
• Operator. This is a user who has been assigned a user name and password. This user
type has full access to most dialog boxes. Operators have no access to the security
settings dialog box and read-only access to the factory settings and the bottle mode
settings.
• Administrator. This user type has a password and full access to most dialog boxes.
Administrators have read-only access to the factory dialog box. The default
administrator entry has a user name of “Administrator”, a user ID of “Admin”, and a
password of “123456”.
• Factory. This user type has full access to all dialog boxes.
NOTE
For security reasons, the first time an administrator or newly created operator logs on
to the system they will be required to change their password.
10.1 Accessing the password dialog box
1) At the home screen, touch the << icon to open the sliding toolbar.
2) Touch the sign on icon.