User manual

PAT700 Total Organic Carbon Analyzer – Diagnostics Page 135
Anatel Operator Manual
8.5 Test tab
Screen calibration icon allows the user to calibrate the touch screen display. If the touch
screen display does not allow accurate item selection, you can use calibrate the display to
your touch. Select Screen Calibration and follow the touch screen wizard to calibrate.
8.6 Calibration dates tab
Use the calibration dates tab for viewing the last dates that TOC calibration, conductivity
calibration, and system suitability test were performed.
Figure 8-16 Diagnostics dialog box, calibration dates tab
TOC calibration date text box (read-only) updates when a TOC calibration has been run and
accepted. The date appears in ISO “yyyy-mm-dd” format.
Conductivity calibration date text box (read-only) updates when a conductivity calibration
has been run and accepted. The date appears in ISO “yyyy-mm-dd” format.
System suitability test date text box (read-only) updates when a system suitability test has
been run and accepted. The date appears in ISO “yyyy-mm-dd” format.
Print icon prints all diagnostic information.
Return icon returns you to the home screen.