User manual

PAT700 Total Organic Carbon Analyzer – Bottle Mode Page 113
Anatel Operator Manual
• Run now icon immediately draws a water sample from the online source into the
excursion bottle and opens the bottle filling dialog box. See Figure 6-28. Once the
bottle has been filled, the excursion captured dialog box appears. See Figure 6-29,
page 111.
• Done icon returns you to the home screen. When an excursion condition occurs,
the analyzer performs an excursion sample capture. Following the excursion, the
analyzer always returns to the home screen.
• Cancel icon takes you to the unload/replace bottles dialog box. All changes made
in any of the dialog boxes are lost.
6.11 Bottle flush mode
Bottle flush mode enables the user to flush the bottles with water from the user’s water loop.
When Bottle Flush is selected, the system will ask the user to load RFID tagged bottles into
the bottle bay.
1) Open the bottle door.
2) Insert the bottles in the order displayed below.
3) Close the bottle door.
4) Press Next to continue.
Figure 6-32 Load bottle dialog box
Once the bottles have been loaded and the bottle bay has been closed, the system will read
the RFID tags on the bottles to confirm which sample positions contain a bottle for cleaning.