User manual

Page 106 Bottle Mode – PAT700 Total Organic Carbon Analyzer
Operator Manual Anatel
• Reps text box allows you to specify the number of repetitions to perform on the
sample bottle. You may enter a value from 1 to 3. The default setting is 3.
• Bottle ID text box allows you to specify an identifier to be used in the data buffer
and in reports. You may specify a 4-digit number. The default setting is 0.
• Return to online mode after analysis check box allows you to return to the home
screen after the test is complete.
• Schedule icon takes you to the schedule test dialog box. See Figure 6-8. All
changes made in this dialog box are retained.
• Run now button takes you to the run grab sample dialog box. See Figure 6-22. All
changes made in this dialog box are retained.
• Cancel icon takes you to the unload/replace bottles dialog box. All changes made
in any of the dialog boxes are lost.
Figure 6-22 Grab sample test in progress dialog box
8) When the grab sample test in progress dialog box appears, the analyzer begins
running the test.
• Upon starting the grab sample, the analyzer performs a temperature stabilization.
Once the temperature has stabilized, the sample bottle is analyzed.
• Cancel icon takes you to the unload/replace bottles dialog box. All changes made
in any of the dialog boxes are lost.
9) When the test is completed, the grab sample summary dialog box appears, with the
results of the test. The results also appear on the printout if a printer is attached.
See Figure 6-23.